Leica Geosystems’ Industrial Theodolites are
known around the world for being the most
accurate, with the highest angular accuracy of
0.5”. These autocollimating theodolites have
set the benchmark with unrivalled precision
and superb optics. Now Leica Geosystems has
set the standard even higher by incorporating
more features and benefits into their latest
industrial theodolite: the Leica TM6100A.
Engineered with leading edge technology
Leica Geosystems has redesigned the direct drive technology
for the Leica TM6100A, using the same Piezo technology
that is used in the Leica TDRA6000 and the Leica Absolute
Tracker AT402. These direct drives offer the stability of
manual drives, the flexibility of fully automated motorized
drives and still allow for sub micron level fine positioning.
The fine adjustment knobs on the Leica TM6100A have
been strategically repositioned to help make measuring in
difficult situations easier and because there are no gears
with this new technology, the direct drives require almost
no maintenance and are nearly silent. Not only does the
Leica TM6100A have a newly designed battery concept, but
since the Piezo direct drive technology requires low power
consumption, the battery lasts longer. Users can work more
than a full day without having to charge or change the battery
Designed with the operator
in mind
Leica Geosystems has added features to the screen and
interface of the Leica TM6100A. The color touch screen
remains clearly visible at all times, allowing operators to take
the theodolite to any location. The intuitive user interface
allows users to have minimal training before doing basic
measurements and calibrations to the sensor. The interface
offers function keys that can be set for specific procedures,
six of the 12 function keys are already pre-set with the most
commonly used procedures. Leica Geosystems continues
to take industrial measurement to new levels with the Leica
TM6100A.
Accuracy
Std. Dev. Hz, V, ISO 17123-3 0.15 mgon (0.5”)
Display least count 0.01 mgon (0.01”)
Focussing distance
(Shortest focussing distance)
from telescope front lens 0.51 m
from telescope tilting axis 0.60 m
Telescope
Type Panfocal alignment
telescope
Image Erect
Objective aperture 52 mm
Clear objective diameter 40 mm
Focusing Coarse and fine
Telescope tilt
pointing direction down –55° (–60 gon)
pointing direction up +47° (+52 gon)
Compensator
Setting Accuracy 0.15 mgon (0.5”)
Setting range 0.07 gon (4”)
Special features
Built-in autocollimation device (green negative crosshair)
Illumination AL51 plug-in lamp
keyboard switch
This information is taken www.leica-geosystems.com